Our high-rise solutions
With our portfolio, we transform your challenges into solutions.
To even higher heights with PERI
We are at your side
-
More than 50years of experience in high-rise construction and climbing technology
-
Around 2000engineers for competent planning and realisation of all projects
-
160locations for effective on-site support – worldwide
Outstanding engineering services
This is how we set ourselves apart from the crowdOur claim is to offer you the best service – worldwide. With our system solutions for high-rise construction, we realise the most demanding projects. Our engineers at headquarters and our subsidiaries transform your requirements into well thought-out solutions. In this context, no challenge is too complex. As a reliable and competent partner, we are at your side to advise you on everything from planning to implementation. One thing is certain: borderless and digital collaboration ensures on-time project completion as well as efficient and safe workflows and optimised costs.
-
![We offer seamless, optimally coordinated formwork and scaffolding solutions combined with out-of-the-box engineering and digital services for demanding high-rise projects around the world.]( "Integrated solutions")
Integrated solutionsWe offer seamless, optimally coordinated formwork and scaffolding solutions combined with out-of-the-box engineering and digital services for demanding high-rise projects around the world.
-
![During the development of PERI climbing systems, the focus is on integrating safety features already in the system. This supports you in minimising safety risks, for example, through the synchronous climbing of several platforms. With the PERI InSite Construction sensor portfolio, you can achieve a further increase in safety.]( "Highest level of safety")
Highest level of safetyDuring the development of PERI climbing systems, the focus is on integrating safety features already in the system. This supports you in minimising safety risks, for example, through the synchronous climbing of several platforms. With the PERI InSite Construction sensor portfolio, you can achieve a further increase in safety.
-
![For a better tomorrow
We have been operating as a climate-neutral company since 2021. Already, 45 percent of the total energy consumption at our headquarters consists of renewable energies. In addition, we promote sustainable construction through rentable, durable and modular system solutions.
Project: Bosco Verticale, Milan, Italy]( "For a better tomorrow")
For a better tomorrowWe have been operating as a climate-neutral company since 2021. Already, 45 percent of the total energy consumption at our headquarters come from renewable energies. In addition, we promote sustainable construction through rentable, durable and modular system solutions.
Reliable solution provider
You can count on usOur solutions for high-rise construction
Formwork, scaffolding and engineering from a single sourceModern construction types and methods allow the implementation of the most demanding architectural designs. Our reliable and safe climbing technology streamlines work processes and allows construction to progress quickly. The technical solutions are tailored to the requirements of our customers, optimise material consumption and construction progress, and also ensure increased cost security. With our profound expertise, we offer you professional support throughout the entire course of the project.
International projects
PERI solutions for metropolitan skylinesWhether complex geometries or surfaces to the highest quality standards: our results are evident in many successfully completed major projects around the globe.
Marina Bay Sands, Singapore
This project shapes the Singapore skyline like no other: The three concave hotel buildings with a height of 195 m accommodate 2,600 rooms and suites. With the help of a comprehensive formwork and scaffolding solution, each of the 55 floors was constructed in just four days. For the core walls, a crane-independent PERI self-climbing solution was used. In addition, large-area slab tables ensured optimised working procedures and minimum crane times. With our continuous technical and logistical support, we were allowed to contribute to the success of the iconic building.
The Sharp # Central Park III, Incheon, South Korea
Only a few kilometres away from the South Korean capital Seoul, two new 140 m high luxury residential towers were built under strict safety requirements and within a tight construction time. PERI met the demand for efficient construction as well as low personnel costs with the new and innovative RCS MAX Rail Climbing System. A premiere, because RCS MAX was used here for the first time on South Korean soil.
Generali Tower, Milan, Italy
The 170 meter high structure, which spirals elegantly upward, features slab geometries that change floor by floor. These revolve around the centrally-positioned, 44-story high-rise core with circular and angled exterior walls whose thickness tapers down to a third of the original 90 cm as the height increases. The use of a project-specific PERI formwork allowed equally safe and therefore fast working procedures. Thus, the standard floors could be constructed in a continuous weekly cycle despite the complicated building geometry. With a shell construction time of only 17 months, the originally planned schedule could be undercut by three months.
Petronas Towers, Kuala Lumpur, Malaysia
The Petronas Towers reach an impressive height of 452 m with a diameter of 50 m each. The PERI self-climbing technology used ensured rapid construction progress while maintaining particularly high safety standards. The climbing formwork was firmly connected to the building at all times so that safe climbing was possible even during the monsoon season. For the 23 m x 23 m building core, 14 external and 10 internal formwork units were used. These could be climbed independently of each other according to the required construction sequence.
The Young Towers, Tel Aviv, Isreal
PERI supported the rapid construction progress with customised engineering services, competent support during the entire construction phase and just-in-time deliveries of the required system solutions. The Young Towers are two residential high-rises with an elliptical layout in the centre of Tel Aviv. The construction of the 40 and 46 storey building complex, which is connected at the top and bottom, was accompanied by high quality requirements.
Turning Torso, Malmö, Sweden
Designed as a high-rise residential building, the project consists of 54 floors and reaches a vertiginous height of 190 meters. The design by Spanish architect Santiago Calatrava is based on a sculpture inspired by the rotating movement of the human body. The PERI self-climbing scaffold hydraulically moved the formwork of the circular high-rise core from floor to floor. The concrete distributor was thereby arranged in the center of the structure. The self-climbing units for the formwork and those of the concrete distributor climbed together.
Dubai Frame, Dubai, United Arab Emirates
For the realisation of this extraordinary, walkable artificial structure, PERI formed a project team consisting of climbing and formwork specialists. From start to finish, they supported the complex structural work with precisely coordinated execution solutions based on system equipment. This allowed the angled core geometry to be constructed within the tight dimensional tolerances and also saved 30 days of construction time.
Absolute Tower, Toronto, Canada
With the Absolute World, the building floor plan rotates by more than 200 degree over 56 floors – with individual rotations between three and eight degrees from level to level. In order to be able to work safely at great heights and at the same time increase work productivity, the working area of the top three floors in each case was completely shielded with a PERI climbing protection panel. In order to be able to move the 30 climbing units independently of the crane and weather, the construction site worked with mobile PERI self-climbing devices and units.
56 Leonard Street, New York, USA
56 Leonard Street is the name and address of an extraordinary skyscraper in Manhattan. The slender tower rises 250 meters into the air and features 145 exclusive apartments and 10 penthouses on almost 60 floors. More than 300 irregularly arranged balconies jut out from the glass facade, and in some places the floors are offset inward. This gives the individual floors the appearance of being stacked on top of or pushed into each other. For the construction, PERI engineers developed a project solution based on rentable modular systems. The climbing protection panel units provided all-round safety in combination with wide cantilevered slab tables.
International Towers Sydney, Barangaroo South, Australia
The ambitious Barangaroo Redevelopment project has redefined Sydney's city center to the west on the 22 hectare site of the former container port. The high-rise complex is the centerpiece of the Barangaroo South subproject. Three office buildings with 39, 43 and 49 stories rise up to 217 meters. In order to be able to meet the tight schedule, PERI's Australian engineers developed a comprehensive formwork and safety concept. The use of mobile hydraulic units saved valuable crane time and thus accelerated the work processes on the large construction site.
That was far from all
Discover here even more interesting projects built with the support of our solutions.
Your contacts worldwide
Contact our PERI experts for your projectDo you need support in planning special formwork solutions or advice from our specialist engineers? Then contact our PERI experts in your country.